| VdS |
| The Cranford Controls manufacturing plant is approved to VdS approval no. G205137. |
| |
| Approved Products |
Approval No. |
| VTG-32E |
The following tones are tested and approved for use in fire detection and fire alarm systems:
 1 - LF Sweep frequency (800-1000Hz in 0.5sec)
8 - LF Continuous Tone (800Hz)
11 - Dutch Sweep Tone (970Hz Continuous)
25 - German DIN tone (Sweep 1200-500Hz @ 1Hz)
27 - French tone AFNOR (554Hz for100ms and 440Hz for 400ms) |
G205137 |
| VSO-32E |
The following tones are tested and approved for use in fire detection and fire alarm systems:
1 - LF Sweep frequency (800-1000Hz in 0.5sec)
3 - Alternating Warble (800-1000Hz @ 0.5s)
11 - Dutch Sweep Tone (970Hz Continuous)
25 - German DIN tone (Sweep 1200-500Hz @ 1Hz)
27 - French tone AFNOR (554Hz for100ms and 440Hz for 400ms) |
G208012 |
| CPD - EC Certificate of Conformity |
| The following products are submitted by Cranford Controls Ltd to a factory production control and to the further testing of samples taken at the factory in accordance with a prescribed test plan. The initial type-testing for the relevant characteristics of the product, the initial inspection and continuous surveillance of the factory and factory production control has been performed under the control of the approved body BRE Certification Limited for the VTG-32E, VPR-DT and VSO-32E and the control of notified body Intertek Testing and Certification Limited for the VTB-32E. |
| Approved Products |
Approval No. |
| VTG-32E |
Conventional Type A/B fire alarm sounder for use in fire detection and alarm systems |
0832-CPD-0255 |
| VPR-DT |
24V Fire Sounder for use in fire detection and alarm systems |
0832-CPD-0493 |
| VSO-32E |
Conventional Indoor Type A sounder base for use in fire detection and alarm systems |
0832-CPD-0605 |
| VTB-32E |
Range of Conventional Fire Alarm Sounder Beacons |
0359-CPD-0060 |
| All provisions concerning the attestation of conformity (Level 1) and the performances described in Annex ZA of the standard EN 54 - 3: 2001 + A1: 2002 - Fire detection and fire alarm systems - Fire alarm devices - Sounders were applied and that the product fulfils all the prescribed requirements. |
| LPCB (Loss Prevention Certification Board) |
| The Cranford Controls manufacturing plant is certified to Quality System Cert. No. 546 Assessed to ISO 9001:2000 |
| Certificate Number: 546a to EN 54-3: 2001 + A1: 2002 + A2: 2006 |
| Certified Products |
LPCB Ref. No. |
| VTG-32E-SB |
Conventional indoor Type A Sounder
Notes:
1) The sounder is approved in red and white colours (-R and -W suffixes)
2) Certified to EN54-3: 2001 with the following selectable tones:
1 - LF Sweep frequency (800-1000Hz in 0.5sec)
25 - German DIN tone Sweep (1200 -500Hz @ 1Hz)
27 - French tone AFNOR (554Hz for100ms and 440Hz for 400ms)
2nd Stage tone for all above (800Hz continuous tone)
11 - 2nd Stage, Dutch sweep tone (500 -1200Hz for 3.5s on, 0.5s off)
|
546a/01 |
| VTG-32E-DB |
Conventional outdoor Type B Sounder
Notes:
1) The sounder is approved in red and white colours (-R and -W suffixes)
2) Certified to EN54-3: 2001 with the following selectable tones:
1 - LF Sweep frequency (800-1000Hz in 0.5sec)
25 - German DIN tone Sweep (1200-500Hz @ 1Hz)
27 - French tone AFNOR (554Hz for100ms and 440Hz for 400ms)
2nd Stage tone for all above (800Hz continuous tone)
11 - 2nd Stage, Dutch sweep tone (500 - 1200Hz for 3.5s on, 0.5s off)
|
546a/01 |
| VPR-DT |
Conventional outdoor Type B Sounder
Notes:
1) Certified to EN54-3: 2001 with the following selectable tones:
1 - Evacuate Tone (500 - 1200Hz Rising Sweep over 3.5 Sec 0.5 Sec off)
2 - Alert Tone (970Hz Continuous Tone)
2) Certified at Maximum Volume only. |
546a/02 |
| VSO-32E |
Conventional indoor Type A sounder base
Notes:
1) Also approved in Off-white, Ivory and Alternative white (-O, -I and –A suffixes)
2) This sounder meets requirements of EN 54-3: 2001 for the following tones at low, medium and high volume settings:
1 - LF Sweep frequency (800-1000Hz in 0.5sec)
3 - Alternative Warble (800-1000Hz in 0.5sec)
11 - Dutch Sweep Tone (970Hz Continuous)
25 - German DIN Tone (Sweep 1200-500Hz @ 1Hz)
27 - French tone AFNOR (554Hz for100ms and 440Hz for 400ms)
3) Cover plate (Part No. 116-099) must be used. |
546a/04 |
| Base: |
116-007FR Viper Mounting Base |
| Intertek Testing & Certification Limited |
| On the basis of the results obtained the product met the requirements of Clause 5.17 of EN54-3: 2001, incorporating amendments A1 and A2 on the second submission. The compliance to these requirements is based on the product as detailed, including any special procedures, configurations and modifications as may be detailed. |
| Certified Products |
Report No. |
| VTB-32E |
Range of Conventional Fire Alarm Sounder Beacons
Notes:
1) The sounder is approved with a deep or shallow base (-SB and -DB suffixes), in red and white (-RB and -WB suffixes) and with red or amber lenses (-RL and -AL suffixes).
2) Certified to EN54-3: 2001 with the following selectable tones at low and high volume settings:
1 ‐ LF Sweep frequency (800‐1000Hz @ 0.5s)
25 ‐ German DIN tone Sweep (1200‐500Hz @ 1Hz)
27 ‐ French tone AFNOR (554Hz for 100ms and 440Hz for 400ms)
2nd Stage tone for all above (800Hz continuous tone)
11 ‐ 2nd Stage, Dutch sweep tone (500‐1200Hz for 3.5s on, 0.5s off) |
10047820 |
| |
